These stabilised chlorine granules are ideal for the daily dosing of your swimming pool water. They are rapidly dissolving and will have little effect on the pH. Please note that they do not contain algaecide/clarifier.
Application Instructions:
- Always maintain pH level within the range 7.2 - 7.6. If the pH level is outside the ideal range, please adjust.
- Maintain free chlorine levels within the range 1-3mg/l (ppm).
- Before applying this product, it should be pre-dissolved in a clean plastic container at a maximum rate of 100g of product to 10 litres of water. Stir well to ensure that the product is fully dissolved. Repeat application to achieve the total dose required - see the table below for dose rates.
- After pre-dissolving, add the resulting solution to the pool near the inlets with the filtration system in operation.
- This product must not be mixed with other chlorines or added to the pool through a feeder or skimmer containing any other products.
- It is recommended that you shock dose your pool once a fortnight, or more frequently in hot weather, using Quick Dissolving Granular Shock.
Read the instructions on the label carefully before use.
The 2kg + packs are delivered by courier.
| Pool Volume (litres) | Pool Volume (gallons) | To Increase Chlorine Level (1mg/l (ppm) | To Increase Chlorine Level (2mg/l (ppm) |
| 4,545 | 11,364 | 22,730 | 45,455 |
| 1,000 | 2,500 | 5,000 | 10,000 |
| 9g | 23g | 45g | 90g |
| 18g | 45g | 90g | 180g |
