Stormcure liquid can be used as an Accelerator, Pre-Cleaner and Primer on Stormsure to make permanent, flexible and waterproof repairs on most materials and fabrics.
Directions:
- As a Pre-Cleaner and Primer:
Clean off mud and dirt from the damaged area with soap and water. Roughen surface with sandpaper, if appropriate. Clean with a small amount of Stormcure Liquid on a soft cloth. Allow to dry. This will degrease the surface before making the repair with Stormsure. It also acts as a primer for the surface, ensuring the best possible adhesion.
- As a Cure Accelerator:
Mix 4 parts of Stormsure Adhesive with 1 part of Stormcure Liquid using a stick. Apply to the damaged area quickly and allow to fully cure. Typically, the full cure will then take 2 hours instead of 12 hours. Handle after 30 minutes.
