Designed for safe and efficient heating of small splasher pools and domestic inground and above ground pools, the Elecro heaters are simple to use and easy to install. They require only a final connection to a mandatory separate RCD (to be fitted by a qualified electrician). The heater is suitable for use with all types of filtration systems.
The heater is available with or without a timer to ensure that your pool is ready when you are.
| Picture Key |
|
1. Electrical Hook Up Access Cover 2. Control Thermostat 3. Mode Status Indicators 4. Reversible Flow Switch 5. Throttle Body 6. Rotatable Wall/Floor Brackets 7. Stainless Steel 316 High Mo Content Tank 8. 1 ½ BSP Thread 9. Weir Chamber |
Features:
- End fitting: incorporates a weir chamber and throttle body. It is designed to induce vortexing of the through flowing water, to ensure that full purging of air is achieved in low flow situations, and to reduce plumbing complexities.
- Heating elements: The low-stress incoloy 825 provides excellent resistance to chemical attack. It has a long life expectancy and the mechanical strength has been increased to allow safe coupling to high velocity pumps.
- Control housing: ABS Fire retardant to VO rating. There is a separate access cover for final electrical connection.
- Flow Requirements: a minimum of 1000 ltrs per hour and maximum of 13000 ltrs per hour.
- Power Requirements: 230V, 53A.
Specifications:
- Main Tank: Stainless steel BS316
- Heating Elements: Incoloy 825
- Control Thermostat: 0-40 Degrees
- Safety Thermostat: 50 Degrees, Auto Resets at 35 Degrees
